Vibrating Wire Surface Strain Gauge

After the rod type inclinometer is connected with the pulley assembly through the stainless steel connecting rod, it is installed in the inclinometer pipe with guide groove and moves together with the inclinometer pipe. The inclination, horizontal displacement and inclination of the structure. With automatic data acquisition equipment, it can be monitored automatically and continuously, and multiple sensors can be installed to obtain the deflection deformation profile along the axial direction of the inclinometer. The application principle is to drill holes inside the structure and install a fixed inclinometer to measure the inclination state inside the structure. Installing multiple inclinometers in the borehole can more accurately monitor the deformation of the building.

This product is widely used in the monitoring of inclination, horizontal displacement and inclination angle of each point structure in foundation pits, slopes, dams, roadbeds, tailings ponds and other structures.

working principle:

The working principle of the guide wheel type fixed inclinometer is to measure the change , so as to calculate the horizontal displacement of the measured structure at different depths. In the long-term monitoring process, the casing is shifted from the initial position to the new position. By comparing the initial measurement data and the current real-time measurement data, the displacement rate, the depth and size of the occurrence are obtained, so as to give early warning and prevent accidents.

Application areas:

Ø   horizontal displacement monitoring of slope structure

Ø   horizontal displacement monitoring of foundation pit support

Ø   Deep horizontal displacement monitoring of dam structure

Ø   Monitoring of deep horizontal displacement of tailings pond structure

Ø   Monitoring of deep horizontal displacement of subgrade

Ø   Other civil engineering structure safety monitoring